Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 42 subscribers
  • Views 21755 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fixed

RobWihnyk

Fixed



This thread was automatically locked due to age.
Parents
  • 0
    You can't get an IP in gateway mode? Why do you configure a rule related to bridge devices? I'm using Unitymedia (cable provider) and I had also some problems getting an IP address. A reboot solves my issue (wait 15 minutes between router change, sometimes the ISP blocks new Mac addresses for a while).
  • 0 in reply to Nemo

    Hey Guys, thanks for the replies. I removed the rule that was said to only be effective in Bridge mode, as I'm trying to set this up as a Gateway. I tried messing with the machine again last night, with the same result.
    My Port 3 interface for WAN states: Connected 100Mbps - Full Duplex Auto-negotiated.
    IP - NA
    DHCP

    I tried removing the greyed out "128.0.0.1" for the Gateway IP, but that didn't make a difference.
    I also set this interface up statically with the outside address I receive currently from my working Firewall(clearos). Set up statically, I'm not able to get to the outside.


    I tried changing my MAC address to possibly show the ISP the machine or adapter has changed. That didn't help either. At this point I'm actually just swapping the hard drive out of the machine that's working as my Firewall, with the Sophos XG configured one.... I wish I could get this to work. I would love to be able to use the features included. Also, I love the UI. If anyone has any other ideas, please let me know. I've rebooted... I've also power cycled my ONT, with no luck as well. Thanks all.

Reply
  • 0 in reply to Nemo

    Hey Guys, thanks for the replies. I removed the rule that was said to only be effective in Bridge mode, as I'm trying to set this up as a Gateway. I tried messing with the machine again last night, with the same result.
    My Port 3 interface for WAN states: Connected 100Mbps - Full Duplex Auto-negotiated.
    IP - NA
    DHCP

    I tried removing the greyed out "128.0.0.1" for the Gateway IP, but that didn't make a difference.
    I also set this interface up statically with the outside address I receive currently from my working Firewall(clearos). Set up statically, I'm not able to get to the outside.


    I tried changing my MAC address to possibly show the ISP the machine or adapter has changed. That didn't help either. At this point I'm actually just swapping the hard drive out of the machine that's working as my Firewall, with the Sophos XG configured one.... I wish I could get this to work. I would love to be able to use the features included. Also, I love the UI. If anyone has any other ideas, please let me know. I've rebooted... I've also power cycled my ONT, with no luck as well. Thanks all.

Children
Unfiltered HTML