Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 42 subscribers
  • Views 20839 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can I install XG Firewall on VMware Fusion or Workstation?

NegeCy

I'm unable to connect as I can't set the IP address as explained for ESX(i). Any suggestions?



This thread was automatically locked due to age.
Parents
  • 0
    SFOS boots for the first time with a "magic" IP 172.16.16.16 and DHCP on that interface. There may be a conflict if you try to bind default LAN interface to VMware interface with DHCP enabled.

    Try disabling DHCP on VMware application - you can find how in VMware KB.

    You can also try setting IP manually to 172.16.16.17 for example.

    The easiest way to configure SFOS is to create a VM with a desktop OS - Ubuntu for example - and configure SFOS from within the VM. I successfuly did it this way after disabling DHCP on VMNet1 interface in Fusion.

    Regards,
    Slawek

Reply
  • 0
    SFOS boots for the first time with a "magic" IP 172.16.16.16 and DHCP on that interface. There may be a conflict if you try to bind default LAN interface to VMware interface with DHCP enabled.

    Try disabling DHCP on VMware application - you can find how in VMware KB.

    You can also try setting IP manually to 172.16.16.17 for example.

    The easiest way to configure SFOS is to create a VM with a desktop OS - Ubuntu for example - and configure SFOS from within the VM. I successfuly did it this way after disabling DHCP on VMNet1 interface in Fusion.

    Regards,
    Slawek

Children
No Data
Unfiltered HTML