Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 41 subscribers
  • Views 19338 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inbound Blocking

EdDe Sousa

I'm trying to get the firewall to block inbound connections. I can not get it to block anything inbound. I have attached a screenshot of the rule I have in place at the top of the policies. This did work with UTM 9.

Has anyone else seen this happening?



This thread was automatically locked due to age.
Parents
  • 0
    Hi EdDe Sousa,

    Can we make sure there are no other conflicting rules above.

    From the policy you created what is accomplished is:
    Drop "SSL VPN + the others listed" services going to any zone, when in "WAN" zone, and coming from any network, destined to the IP addr. on port2. Is this correct? So when you simulate traffic it is destined to the IP addr. assigned on Port2
Reply
  • 0
    Hi EdDe Sousa,

    Can we make sure there are no other conflicting rules above.

    From the policy you created what is accomplished is:
    Drop "SSL VPN + the others listed" services going to any zone, when in "WAN" zone, and coming from any network, destined to the IP addr. on port2. Is this correct? So when you simulate traffic it is destined to the IP addr. assigned on Port2
Children
No Data
Unfiltered HTML