This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to get a sixxs tunnel to work?

Hi,

moved the native IPv6 link to the UTM where it works. Now have the lin with the sixxs tunnel connected to the SF-OS and would like ot get it working. Any hints?

Ian

This thread was automatically locked due to age.

0 KillJoy over 8 years ago

It seems that XG does not have AICCU (heartbeat protocol Sixxs uses) support integrated (yet?). Please vote for the feature at http://feature.astaro.com/forums/330219-sophos-xg-firewall/suggestions/10862220-add-aiccu-support-ipv6-sixxs-net

It might be possible to configure 6to4 tunnel with static addresses the same way you'd do on a Mikrotik device. I will try this later this evening. Of course static configuration would mean your tunnel will stop working if you have dynamic WAN IP and the IP changes.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 8 years ago

Voted and commented.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel