Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can i create Virtual Gateways

I have 4 NIC ( LAN - WAN - DMZ - GUEST ) and i have 3 DSL lines .


i already configrued multi Alias IPs for each DSL line on the WAN NIC . and only 1 Gateway

now how can i add the other 2 dsl gateways?


do i have to have 3 physical NICs to do that ?

Thanks



This thread was automatically locked due to age.
Parents
  • If you are using all the 4 NICs already, try terminating 3 ISPs in to seperate VLANS change the NIC 2 to any custom zone (could be your LAN or DMZ) and add VLANS to each of the ISP under the WAN zones you should be able to achieve what you need.
  • Kranthi Yadlapudi :) . is there any other way to do this without going to VLANs ?
    Thanks
  • You can only have one gateway, you need to setup routing to use the ISP services on the other ports.
    There are exceptions to this rule and that is if you have multiple internal networks that need to go the these ports and not others.
    Think about how the packets would know where to go if you have one internal network and 3 external networks each with their own gateway?

    ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • You can only have one gateway, you need to setup routing to use the ISP services on the other ports.
    There are exceptions to this rule and that is if you have multiple internal networks that need to go the these ports and not others.
    Think about how the packets would know where to go if you have one internal network and 3 external networks each with their own gateway?

    ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data