Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Internet Access point

Hello good morning people, I don't know if it is well configured with the delivery of the internet we have for example the port4 is 250 megabytes of internet, but when I'm at the access point it gives me very little internet, I already did the test with speedtest

How do I know that they are delivering all the internet?



This thread was automatically locked due to age.
  • Hi,

    which version of XG firmware and hardware you using? Why so many WAN ports and only one LAN port? Please post a copy of your firewall rule allowing traffic out and the NAT rule/s.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • Hello
    Why so many ports is that we have several internet provider services.

  • Hi,

    they are NAT, what I am after is the firewall rule.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • Please define "very little internet".
    Which bandwidth do you reach with upload/download?
    Which IP-Address do you have with the test-client?
    Please try myip.dk ... do you use the expected WAN port?
    Try to disconnect unneeded WAN-ports?
    With a Client connected per wire to LAN5-Network ... the problems exist too?
    Which switch / port configuration do you use between firewall and accesspoint?
    Please explain "RED_WIFI" ... used in MASQ-Rule


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.