This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Performance is horrible using TCP or UDP

We have 2 XG330 in HA, a 300Mbit connection and are using the SFOS 20.0.0 GA-Build222 firmware with Sophos Connect.

Using the SSL VPN with UDP we are seeing speeds of 3.6Mbit down and 6.9Mbit up. The Client has 100Mbit.

I've read a lot of different threads here regarding this issue, most of them are older than 2 years and most of them do not have an acceptable answer to this problem other than to switch the people who need a faster connection to IPSEC.

If anyone has any ideas I'll be glad to hear them.

This thread was automatically locked due to age.

Top Replies

Giridhar Katti 6 months ago +1 suggested

Hi Shawn Adams - Without setting up the SSLVPN tunnel between the client and the XG, can you configure a DNAt rule on the XGS and do the perf test(you can use iperf) to the server behind the XGS and check…

Parents

0 PhilippRusch 6 months ago

Hello Shawn,

this sounds like an MTU problem to me on either both links or at least one of them.

Normally, IPsec tunnels are more likely to have this kind of problem, but we should check this.

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shawn Adams 6 months ago in reply to PhilippRusch

The VPN is set to 1300 on both ends
Cancel
Vote Up 0 Vote Down

Cancel
0 PhilippRusch 6 months ago in reply to Shawn Adams

OK, this sounds good. We should exclude that as possible reason.

Did you by chance enable "compression" in SSL global settings?

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shawn Adams 6 months ago in reply to PhilippRusch

Yes it is on. We were told not to turn it off.
Cancel
Vote Up 0 Vote Down

Cancel
0 PhilippRusch 6 months ago in reply to Shawn Adams

OK, we found it.

You should turn it off definitely.

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 PhilippRusch 6 months ago in reply to PhilippRusch

And, while working on this, you should check the debug setting to be turned off, as well.

Mit freundlichem Gruß, best regards from Germany,

Philipp Rusch

New Vision GmbH, Germany
Sophos Silver-Partner

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shawn Adams 6 months ago in reply to PhilippRusch

Debug is off, so I guess this means all the users will need to download a new profile again...
Cancel
Vote Up 0 Vote Down

Cancel
0 Shawn Adams 6 months ago in reply to PhilippRusch

I have to wait until we have tested this before I can Verify it as an Answer. Ich hoffe das es geht :-)
Cancel
Vote Up 0 Vote Down

Cancel
0 BrucekConvergent 6 months ago in reply to Shawn Adams

Changing the Debug Mode setting should not result in a need to download a new profile; changing the compression setting will (and I agree with the others, turn that off).

CTO, Convergent Information Security Solutions, LLC

https://www.convergesecurity.com

Sophos Platinum Partner

--------------------------------------

Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Cancel
Vote Up 0 Vote Down

Cancel
0 Shawn Adams 5 months ago in reply to BrucekConvergent

compression is now off, no change in performance at all. Do I need to reboot the firewalls?
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Shawn Adams 5 months ago in reply to BrucekConvergent

compression is now off, no change in performance at all. Do I need to reboot the firewalls?
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Shawn Adams 5 months ago in reply to Shawn Adams

I'm starting to think we should try IPSEC for the users who need it, I've read that it is faster than the SSL.
Cancel
Vote Up 0 Vote Down

Cancel
0 BrucekConvergent 5 months ago in reply to Shawn Adams

No reboot should be needed.

You have an interesting problem there, and I haven't seen a speed issue like this in a while. Though in the recesses of my mind, I recall a couple of scenarios:

1) The WAN link on the firewall had a speed / duplex mismatch with the ISP gear -- granted I have not seen this in many moons but I have before. Causes strange behavior.

2) I don't see it mentioned here -- have you disabled UDP flood protection? That can cause issues with UDP streams.

3) Also, haven't seen it here, have you tried testing, say, from a directly connected link? There could be some throttling happening at your ISP, the client's ISP, or in between, of that traffic. YOu can try a different port, etc.

Of course trying IPSEC may work as well -- but more "free" Wi-Fi connections block that usage than others.

CTO, Convergent Information Security Solutions, LLC

https://www.convergesecurity.com

Sophos Platinum Partner

--------------------------------------

Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries. Use the advice given at your own risk.
Cancel
Vote Up 0 Vote Down

Cancel