Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cant get a simple directly connected network firewall rule working. XGS126

I am completely stumped by this.  I am sure its something obvious that I am overlooking. 

Lan Port 1 - 192.168.1.254/24

MGMT port 5 - 172.16.0.254/24

I already had a rule saying mgmt subnet source 172.16.0.0 could access lan subnet destination 192.168.1.0.   That worked fine, the mgmt server (172.16.0.1) can RDP etc to the LAN server (192.168.1.250).

but then the server engineer said could I allow access from mgmt server to the LAN server ilo (192.168.1.251).   First off I couldnt work out why this wasnt just working with the above rule.

So set up a separate rule above the other one just for mgmt server to lan server ilo but when I ping or try access it it doesnt work. I can see the out counter slightly increasing on the rule.  

In the firewall logs I can see the rule being hit and being allowed. 

What am I missing?  I know the ilo is working fine as it is reachable from the lan network server so ive got past it being a physical (cable, connection) issue.



This thread was automatically locked due to age.
Parents Reply Children
  • But, you talked about the server then the ILO as being two different objects?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • yes sorry i just mentioned the lan server as that connection works fine from the mgmt subnet using the standard rule.  So I am assuming i dont need the lan server 192.168.1.250 in the rule above.  as its just the ilo 192.168.1.251 thats the issue.