Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VLAN routing not working as intended on XGS136, I know I am missing something!

I know this is me missing something, but I migrated my wifi configuration from a SG135w to a XGS136 a couple of month ago and I have only just noticed that its giving the wrong IP's for each of the 3 wifi networks. I cant figure out what extra I need to setup on the XGS to make it do what it should do. 

Basically I have 3 wifi networks setup on Port 3 of the XGS, "Admin - 192.168.10.xx GW 192.168.10.254" is setup on the port and "Public - 192.168.20.xx GW 192.168.20.254 is setup as VLAN 100" and "Private - 192.168.50.xx GW 192.168.50.254 is VLAN 200" (this all used to work fine on the SG135) 

Now if anyone connects to any of those wifi networks it only give out IP from the 192.168.10.xx network. 

I know this is like I haven't setup the NATs or something for the other 20 and 50 networks, but I am not entirety sure how to do that on the XGS136

But I have only just noticed that its been working this way. Using the VLANS was just a way to make sure the right wifi networks went through the right filtering. 

Can someone point me in the right direction. With screenshots would be helpful. 

Cheers...



This thread was automatically locked due to age.
Parents Reply Children
No Data