Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPv6 LTE Router Telekom

hi Community. 

we have a lte router with a static IPv6 IP-Address on the WAN-Side. 

I turned on the DHCP for IPv6 as you can see below: 

and as you see, the xgs gets an ipv6 address: 

The Sophos Cluster has v20 installed and I can see the cluster is online in sophos central but surfing or anything else isn't possible. 

this is maybe a dumb question but is it necessary that the internal clients have also an ipv6 address ? Or does it work internal v4 <> external v6 ? 



This thread was automatically locked due to age.
Parents Reply
  • Hi,

    the xg does not translate, you will need internal IPv6 addresses and firewall rules. As from v20 you do not need an IPv6 Nat.

    ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children