Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 2467 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA interactive: "Peer administration IP" and "Interface IP address" must be in the same network

LHerzog

I try to setup interactive HA on XGS 126 SFOS v20

I used to setup  devices this way, now I must use the same IP range for HA and management?

The HA Link should be /30 network with only the HA IP - why must the management IP be in the HA network?

Primary:



This thread was automatically locked due to age.
Parents
  • +1

    The error is based on the Peer Administration IP. Its the 172.16.16.17,

    The Webadmin here is complaining, that the 172.16.16.17 is not in the same range as your port1

    __________________________________________________________________________________________________________________

Reply
  • +1

    The error is based on the Peer Administration IP. Its the 172.16.16.17,

    The Webadmin here is complaining, that the 172.16.16.17 is not in the same range as your port1

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML