Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 1926 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Accessing subdomains.

Kurt File

Hello all.  I'm a newb home user coming from OpnSense.  I'm having an issue accessing my subdomains.  This is something simple that I'm just not understanding.  A couple pics will help explain what I'm trying to accomplish, and my setup.

Interfaces

DHCP (note that the bottom 2 are in reverse order aka it shows PortD then PortC, not that this matters).

Firewall Rules

PortB and PortC can access the internet (I didn't try PortD).  PortB can't access PortD.  In the CLI I can ping both just fine.  How can I enable PortB to access PortD?

Also on PortB I used the predefined zone called WiFi (as this is an access point).  Is this ok, or should I create my own name?

Thank you.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    you need a rule to access each port/network. You can basically use whatever name you choose.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    I meant to say "How can I enable PortB to access PortC?"  I was assuming that you said I need a rule you meant firewall rule.  That is what I thought that I had, like in my last picture.  Again, I had misspoke when I said B to D.  I meant B to C.

    Thanks again.

  • 0 in reply to Kurt File

    I suggest you change your port names from PORTD to something meaningful. You appear to have mixed up port names with zones.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to Kurt File

    I suggest you change your port names from PORTD to something meaningful. You appear to have mixed up port names with zones.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to rfcat_vk

    Great suggestion.  So this is what I have now.  I know it's something really simple.

    My OS is linux, A shell ping doesn't respond to 192.168.30.2, but the CLI does.  ifconfig shows a 192.168.4.136

    I changed my zones to all use LAN, and removed the other zones.

    Thanks you for your help.

Unfiltered HTML