Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 5935 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to access the GPON ONT converter from Sophos XG after successful PPPoE dial-up ?

J Thai

Hello,

My GPON ONT converter device is one without the DHCP mode (static IP 192.168.50.x). Once I have connected my Sophos XG firewall device with it for a successful PPPoE dial-up, I can no longer access it by assigning a static IP of 192.168.50.y to my endpoint PC.

The current local subnets on my Sophos XG are:


_192.168.2.0/24 (LAN)
_192.168.3.0/24 (LAN)


_192.168.7.0/24 (VLAN)
_192.168.11.0/24 (VLAN)
_192.168.12.0/24 (VLAN)

I look forward to still being able to access its web gui even after successful PPPoE connection, is there a way to do this ?

Thank you very much in advance. 



This thread was automatically locked due to age.
Parents
  • 0

    Not sure but maybe you can add an alias address to the interface connected to the ONT. The alias should of course be in 192.168.50.x range.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0

    Not sure but maybe you can add an alias address to the interface connected to the ONT. The alias should of course be in 192.168.50.x range.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML