Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 6206 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home firewall on XG 125w rev3 has wrong interface numbers

EastCoastUser

Installed home firewall on XG 125w rev3. The software shows ports 5 and 6 as Port 1 (LAN) and Port 2 (WAN). It seems all of the ports are numbered wrong. Is there any way to configure the software to see the correct port numbers? 




This thread was automatically locked due to age.
Parents
  • +1

    Hi,

    that is a known issue when using software install on Sophos hardware. The fix would only be temporary until the next firmware upgrade.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1

    Hi,

    that is a known issue when using software install on Sophos hardware. The fix would only be temporary until the next firmware upgrade.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML