SSL VPN Access

The same SSL VPN pool subnet 10.242.2 I am using for UTM SLL Pool and it works in Branchoffice it means there should no firewall block in Branchoffice 

Not sure if I get you correctly, but do you have SSL-VPN configured in Branch office with same subnet 10.24.2.0/24 as you have in head office?

If so than that is the reason for the routing issue since in that case the branch office will not send traffic for 10.242.2.0/24 network back to head office.

No I used three dieffrent subnet Head office 192.168.9.x  branch office 192.168.132.x SSL VPN 10.242.2.x

Hi Nazir Heravi,

Correct me if I am wrong, but the way I understand it is that you would like to pass traffic from the remote SSL VPN to an existing IPsec tunnel. If yes, then this kb-article could be helpful for you: Sophos Firewall: Allow Remote Access SSL VPN traffic over an existing IPsec tunnel.

You’ll need to add an IPsec route to ensure that SSL VPN traffic will be routed to the IPsec tunnel.

Let us know how this works on your setup.