Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 5375 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos routing

eecl

Hello,

How can i configure a routing for this scenario? I tried some configurations but i´m not having any success.

Trying to configure sophos and wireless apx to work in different networks.

I´m connecting via wireless to APX320 and getting a DHCP for 172.1.1.5

I need to configure a routing so this network can reach the 192.168.40.0

They have to be different networks since 192.168.40.0 is running out of ip address.

Its possible to make this work?



This thread was automatically locked due to age.
Parents
  • 0

    Hi Eecl,

    Thank you for reaching out to Sophos Community.

    A few questions:

    1. Can you share the network topology of your setup with us? This will help us understand the traffic flow.
    2. Are you managing the APX through the firewall or Sophos Central?
    3. What is the mode of the APX (Wireless - Sophos Firewall)? Is it Separate zone wireless networks or Bridge to access point LAN wireless networks?

    If there’s also a Layer 2 network switch between the firewall and the network 192.168.40.0 its possible that the network will only respond to the IP of the same subnet. In that case you would need to configure a Linked nat rule to the policy and select MASQ in the translated source(SNAT): Create a firewall rule with a linked NAT rule - Sophos Firewall

    Let us know any updates on this issue.

    Regards,

Reply
  • 0

    Hi Eecl,

    Thank you for reaching out to Sophos Community.

    A few questions:

    1. Can you share the network topology of your setup with us? This will help us understand the traffic flow.
    2. Are you managing the APX through the firewall or Sophos Central?
    3. What is the mode of the APX (Wireless - Sophos Firewall)? Is it Separate zone wireless networks or Bridge to access point LAN wireless networks?

    If there’s also a Layer 2 network switch between the firewall and the network 192.168.40.0 its possible that the network will only respond to the IP of the same subnet. In that case you would need to configure a Linked nat rule to the policy and select MASQ in the translated source(SNAT): Create a firewall rule with a linked NAT rule - Sophos Firewall

    Let us know any updates on this issue.

    Regards,

Children
No Data
Unfiltered HTML