This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Dell Quad Port 10GbE RJ-45 QLogic FastLinq PCIe CNA Network Adapter High 33M0K

NIC not seen in console. Is there a way to get drivers for this? It shows up in BIOS of the server etc. But unable to configure/add in the main interfaces

This thread was automatically locked due to age.

0 rfcat_vk 11 months ago

Hi,

are you asking about installing the adapter on an XG? You cannot install your own drivers on the Sophos firmware.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Arlen Chase 11 months ago in reply to rfcat_vk

No I'm trying to use the home firewall and install the NIC. If this is the wrong forum please let me know where to post.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk 11 months ago in reply to Arlen Chase

This is the correct forum, just you did not post any details about what you are trying to achieve. What is your hardware?

If you want to use that NIC card you will need to use a VM.

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel