Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 2 answers
  • Subscribers 42 subscribers
  • Views 19554 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Requirements

D-B-R

Hi everyone

I installed my Sophos Home on a Mini-PC but it does not shows my NICs up. 

specs

  • Intel Celeron J4125
  • 8 GB RAM
  • 256 GB SSD
  • 4x 2.5 GBps LAN (i226-V)

Any idea what can solve my problem? 

Thx



This thread was automatically locked due to age.
Parents
  • 0

    As told above, Sophos does not natively support your NICs.

    What you can do is to install Proxmox on the device and install Sophos as a virtual machine on top of that. Proxmox does support the i226 nics and with 8 GB RAM you have enough to still give 6GB to your firewall which is the max for a home license.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • 0 in reply to apijnappels

    Hi,

    As I have expressed in another thread about the same mini-pc, I would be concerned about the j4125 being able to provide a 4 core XG as well as run the Proxmox VM environment. The j4125 is a 4 core 4 thread maximum CPU of 2ghz capable of bursting to 2.7ghz. 

    Ian

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi

    To be honest I don't want to setup the FW in a VM. I want to install it on a bare metall to avoid some possible issues and to keept the setup uncomplex.

Reply Children
  • 0 in reply to D-B-R

    Hi,

    very few motherboards come with the non EUFI boot feature anymore.

    You would need to look at a small motherboard where you can add your own NICs or buy an old XG unit from the internet and then instal the home licence on it.

    Ian

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML