Allow Port in Sophos Firewall

Question

Hi Everyone, 
 I am new to Sophos firewall and I dont know much about this. Can any one tell me how to allow following port in Sophos XG135 (C1B0Cxxxxxxxxxx) 
 
 CLOUC uses the following Ports HTTP, HTTPS and 9443 for the web console 5060 and 5061 TCP for SIP 5060 UDP for STUN and UDP 49152 to 65535 for RTP CLOUC Is hosted at the following IP addresses 103.21.158.56/29 (Primary site) 27.50.73.112/29 (Secondary Site) COUC Uses the following IP and ports for Firmware updates Cloudflare 162.159.200.123/32 123 UDP fot NTP

rfcat_vk · Answer

Hi, 
 you create a firewall rule - zone LAN, network - LAN, destination zone WAN, destination networks (create a IP network for each address range) the created address range names, services select those that yo can from the drop down lists and you might need to create your own service for the RTP range. and finally allow 
 web - Allow - use proxy 
 applications - allow all 
 IPS - LAN to WAN 
 This will get you started, you might need refine some of the web as not being required and the same with the applications. 
 
 Finally there are KBAs with details to help setup similar scenarios. 
 Ian

Bharat J · Answer

Hi Prasad Prasad 
 Try with the destination base firewall rule and add services on the same rule 
 
 Regards

Allow Port in Sophos Firewall

Top Replies