Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1559 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Snmp v3 Trap

FrancescoBattistin

Hi guys,
I'm capturing SNMP traps from an XG appliance. Everything works fine with SNMP version 2, but I'm unable to capture traps with SNMP version 3 because it seems that the XG appliance is sending an incorrect EngineID. To detect the EngineID, I'm reading the OID "1.3.6.1.6.3.10.2.1.1.0". To test my system, I've sent a trap using snmptrap, and it's captured correctly. I've enabled debug mode for my snmptrapd daemon, and from the debug logs, I can see that a different EngineID is being sent compared to the one read from the query that interrogates the OID "1.3.6.1.6.3.10.2.1.1.0".

Has anyone else encountered a similar issue?



This thread was automatically locked due to age.
Unfiltered HTML