Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 7 replies
  • Subscribers 41 subscribers
  • Views 1903 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route problem on XGS116 firewall

David Chour

Hello,

I'm stuck on a LAN routing problem.

We changed our UTM firewall to XGS116, I recreated the rules and configuration on the new firewall, but I have a problem with the incoming traffic to the internal network.

We have several offices that are interconnected by MPLS.

From the other offices I can no longer reach the head office network, but I can reach the subnet

Here is a diagram and the static routes.

Can you please help me ^^



This thread was automatically locked due to age.
Parents
  • 0

    Hello everyone, thank you for your answers.
    Bharat J helped me and the command solved my problem.
    set advanced-firewall bypass-stateful-firewall-config add source_network [source network IP] source_netmask [source subnet mask] dest_network [destination network IP] dest_netmask [destination subnet mask]

Reply
  • 0

    Hello everyone, thank you for your answers.
    Bharat J helped me and the command solved my problem.
    set advanced-firewall bypass-stateful-firewall-config add source_network [source network IP] source_netmask [source subnet mask] dest_network [destination network IP] dest_netmask [destination subnet mask]

Children
No Data
Unfiltered HTML