This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

v19.0 upgrade risks

IT Cedar Admin over 1 year ago

For those that upgraded, any risks of functionality breaking?

One concern I have is whether VPN users certificates will change and need re-enrollment?

This thread was automatically locked due to age.

Top Replies

ChrisKnight over 1 year ago +2

If you're upgrading from 18.5.2 MR2 and performing antispam filtering be aware that the antispam engine has been upgraded to SASI and the detection rates are truly abysmal. Wait for 19.0.1 MR1 and hope…

Parents

0 Karsten Schenk over 1 year ago

I have an update from 18.5 MR3 to 19.0. After that the LACP connection with SFP+ doesn't work anymore with my Dell S4048 switcht. I'm also waiting for an answer from support.
Cancel
Vote Up 0 Vote Down

Cancel
0 LuCar Toni over 1 year ago in reply to Karsten Schenk

check for Auto Negotiation. Set it, if not set.

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 Karsten Schenk over 1 year ago in reply to LuCar Toni

Auto Negotiation is set.
LACP link with Firmware 18.5 MR3 works well.
Cancel
Vote Up 0 Vote Down

Cancel
0 LuCar Toni over 1 year ago in reply to Karsten Schenk

You could try to disable it and check, if the Links are online or not.

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 Karsten Schenk over 1 year ago in reply to LuCar Toni

The Links are online.
I have change the LAG at the Firewall from Auto-Negotiation to 10000 Full duplex -- > The LACP link come up.

After then I change back the LAG interface to Auto-Negotiation. It works..

Then I restart the Firewall and no LACP Link come up.
Cancel
Vote Up 0 Vote Down

Cancel
0 BeEf over 1 year ago in reply to Karsten Schenk

Yes of course. The auto negotiation is only happening when the interface is coming up. If you change it later you have a running config and nothing will happen until you do a reboot.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BeEf over 1 year ago in reply to Karsten Schenk

Yes of course. The auto negotiation is only happening when the interface is coming up. If you change it later you have a running config and nothing will happen until you do a reboot.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data