Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 2035 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SD-RED 20 LINK is up but i can't ping anything

morad segten

Hello , am trying to reach my LAN on HQ 192.168.1.0 and 172.16.1.0 , i setup my RED as following ( See pictures ) . Somethning is missing but i dont know what it is ! 

The Machine am doing the TEST on , is connected to PORT1 on the RED DEVICE , and having the ip @ : 192.168.5.100/24   GW: 192.168.5.5  ( NO INTERNET ACCESS on it ) i dont know if it's normal behaviour 





This thread was automatically locked due to age.
  • FormerMember
    0 FormerMember

    Hi  

    Thank you for reaching out to the Community! 

    Could you please check if your RED is deployed in the LAN zone? If yes, please create LAN to LAN firewall rule to allow traffic from the RED network to your LAN network. 

    If the RED operation mode is standard/unified then you have to create a firewall rule for the RED network to access the internet.

    Thanks,

Unfiltered HTML