Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 39 subscribers
  • Views 4034 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HOW CONFIGURE TWO WAN INDEPENDENT OF LAN ZONE AND DMZ ZONE

Andres Nastar

Hi bro how are you?  I need configure the next topology, but I dont Know how is the rule.

 

 

 

I guess that are two rules but the destination are IP´s or the gateway.



This thread was automatically locked due to age.
  • FormerMember
    +1 FormerMember

    Hi Andres,

    Please see below examples for DMZ to WAN and LAN to WAN firewall rules with dedicated gateway - 

    DMZ to WAN (PortB) - Add User/Network firewall rule - 

     

    LAN to WAN (PortD) - Add User/Network firewall rule - 

     

    Port B and Port D are both in WAN zone.

    In the Destination networks, please configure the destination networks for the traffic not the gateway.

  • 0 in reply to FormerMember

    Hi Captain_A ,

     

    Is it necesary static Routes?

     

    In this "In the Destination networks, please configure the destination networks for the traffic not the gateway." Can I do in destinations networks how any? In both rules

     

    Thank you

  • FormerMember
    0 FormerMember in reply to Andres Nastar

    Hi Andres,

    There is no need to configure static routes for different destinations.

    Yes, you can use ANY in both firewall rules. The traffic will be selected based on the source Zone (DMZ/LAN). 

Unfiltered HTML