This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec mit NAT

Hallo zusammen,

folgendes Problem:

Standort A: 192.168.9.0/24
  |
VPN
  |
Standort B: 192.168.2.0/24 ; XG550, 7.10
  |
VPN
  |

über NAT 192.168.7.0/24
Standort C: 192.168.10.0/24

Jetzt möchte ein User vom Standort A über den Standort B auf den Standort C zugreifen.

Was muss ich an dem Standort B auf der XG550 einrichten? Policy Routing?
Wie muss das aussehen?
wie ich geschrieben habe, Standort B verbindet mit C über IPSec und NAT.

Vielen Dank im voraus

This thread was automatically locked due to age.

Parents

0 BAlfson over 4 years ago

Hallo Ahmad,

Herzlich willkommen hier in der Community !

(Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

Here's a link to an explanation in German about how to do this with the SG UTM. The concept is the same for the XG.

MfG - Bob (Bitte auf Deutsch weiterhin.)

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 4 years ago

Hallo Ahmad,

Herzlich willkommen hier in der Community !

(Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

Here's a link to an explanation in German about how to do this with the SG UTM. The concept is the same for the XG.

MfG - Bob (Bitte auf Deutsch weiterhin.)

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data