Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 1797 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After update 17.5.10 MR-10 the ssl VPN client is 0 KB

ebrenas

Hello,

I passed the update 17.5.10 MR-10 on my XG 135 and since then impossible to install the VPN client. The downloaded program is 0 KB and the configuration file too. Do you have the same problem ?

Thanks,

Manu.



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi Syndicat Ardèche Drôme Numérique,

    If you are trying to configure SSL VPN Remote access for the first time. Please try to regenerate the default certificate. 

    Step 1) Regenerate Default CA on Certificates->Certificate Authorities page. > You can do this by changing any value such as State or Locality Name and save, it will regenerate the certificate and once it is done you can change back to the original value. 

    Impact : Default CA and Appliance Certificate will be regenerated.

    Step 2) Now try downloading SSLVPN configuration from user portal.

    Thanks,

  • 0 in reply to FormerMember

    Hi,

    thank for your message.

    Looking in / content / ssl_vpn I saw that the programs were present on the Slave Firewall but not on the Master.

    I turned off the master and get the binaries. And by restarting the master after a while the programs were again available.

    Everything is OK.

    Thank you !

  • FormerMember
    0 FormerMember in reply to ebrenas

    Hi ebrenas,

    Thank you for sharing your findings with the Community. 

    I am glad that you were able to resolve the issue. 

    Thanks,

Reply Children
No Data
Unfiltered HTML