Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 1857 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

viewing multiple firewall rules in log viewer filter

onward

XG210 (SFOS 17.5.9 MR-9) - Is there a way to filter for multiple firewall rule id#'s in a single log viewer window?  A "starts with" condition wouldn't give the desired result for this example due to the numbering.



This thread was automatically locked due to age.
Parents
  • 0

    Just off some quick testing it appears the filter for a firewall rule can only show one rule, I did try to do a couple variations in csv format to see if you could add more than one rule but no luck.  If you try to add a second filter it replaces the original as expected.  

     

    But after looking at the log viewer I would think that you could be more granular in your search terms with an IP address, username or some other factor and use the firewall rule column.

     

    Just some thoughts,

    Respectfully, 

     

    Badrobot

     

Reply
  • 0

    Just off some quick testing it appears the filter for a firewall rule can only show one rule, I did try to do a couple variations in csv format to see if you could add more than one rule but no luck.  If you try to add a second filter it replaces the original as expected.  

     

    But after looking at the log viewer I would think that you could be more granular in your search terms with an IP address, username or some other factor and use the firewall rule column.

     

    Just some thoughts,

    Respectfully, 

     

    Badrobot

     

Children
Unfiltered HTML