[Solved] SSL VPN : can't access the internet after 1 hour of use

Mueller,

are you still connected in the VPN tunnel?

Are you able to ping remote lan resources when this occur?

I recommed you to upgrade to MR9 also.

Mueller,

are you still connected in the VPN tunnel?

Are you able to ping remote lan resources when this occur?

I recommed you to upgrade to MR9 also.

lferrara,

Thank you.

Yes, still connected in the VPN tunnel, the LAN resources is OK, only can't access the WAN resources.

Is the disconnect idle clients enabled on the VPN SSL?

Try to disable it.

Thanks

I have disabled it, still has this issue

Did you try now or already in the previous days?

When you change the option, clients need to disconnect and reconnect to reflect the change.

Regards

I have tested these possible configurations before, but all have this problem.

I guess it should be OK with the setting of SSL VPN, because I can still access internal resources, such as the portal of XG210  and other LAN devices.

We have two WAN line, I use one WAN line for SSL VPN connect, then the VPN client access internet from other WAN line.

The following is the configuration of Firewall. Could you please help to check if it has problem?

Thank you.

lferrara,

this issue has been solved, Maximum session timeout of Authentication's Services defalut is 60Min.

Thanks for your help