Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 19 replies
  • Subscribers 38 subscribers
  • Views 4463 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Issue with my VLANs

Rodney Altamera

Hi to All Sophos Gurus,

 

Good day.

I have been fixing my vlan routing in my Sophos XG 210 Firewall. I created different gateways for each VLANs. Below are the details.

VLAN10 :

IP = 192.168.10.0/24

DG = 192.168.10.254

ISP1

 

VLAN20 :

IP = 192.168.20.0/24

DG = 192.168.20.254

ISP2

 

VLAN30 (Wireless) :

IP = 192.168.30.0/24

DG = 192.168.30.254

ISP3

 

I have all my servers on VLAN10. I wanted to share my fileservers in VLAN10 to all other VLANs. I already created a firewall rule in my SOPHOS. The problem I cannot access my fileservers. Did I do something wrong. Someone might be able to help me. Below is a screenshot of my network diagram and firewall policies LAN to LAN.

Network Diagram

Firewall VLAN to VLAN Policy.

If anyone can give me an idea it would be great! 

 

Thanks

 

Rodney



This thread was automatically locked due to age.
Parents
  • 0

    Rodney,

    where did you create the VLAN?

    Is the routing enabled on the Switch?

    How did you create the VLAN on the switch?

    Please share the configuration.

    Regards

  • 0 in reply to lferrara

    Hi Iferrara,

     

    I created the vlan on sophos since the switch does not support L3. It is only a L2 switch. So what I am planning is making the sophos handle the L3 routing. I created vlan on the switch using the GUI. I am using HP switches. 

    My vlans are just working fine. The problem I am facing is all vlans cannot access the fileserver on vlan10.

     

    Thanks

Reply
  • 0 in reply to lferrara

    Hi Iferrara,

     

    I created the vlan on sophos since the switch does not support L3. It is only a L2 switch. So what I am planning is making the sophos handle the L3 routing. I created vlan on the switch using the GUI. I am using HP switches. 

    My vlans are just working fine. The problem I am facing is all vlans cannot access the fileserver on vlan10.

     

    Thanks

Children
No Data
Unfiltered HTML