This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG with less Port backup restore

I have a client with an XG230 and a HA unit. The previous provider didn't set HA and I want to do a lot of clean up and update the firmware and configure HA properly. I have been able to get all 27 store set up properly and was able to swap units because they had a spare XG105. I have a spare XG 115 I keep for emergency. I want to restore the config from their XG230 into my XG115 in case of emergency because I have a short window to perform this since they are almost 24/7 and all 27 stores connect to this XG230.

Any way I can edit the config so the XG115 take it. They are currently using 4 port and the last port for HA. I can delete the last port out of the config since this will be a backup unit without HA. Any way I can do this?

Thanks

This thread was automatically locked due to age.

0 LuCar Toni over 4 years ago

Basically this is the working KBA: https://community.sophos.com/kb/en-us/124585

You could use the workaround via Import/Export https://docs.sophos.com/nsg/sophos-firewall/v16058/Help/en-us/webhelp/onlinehelp/onlinehelp/APIImportExport.html

The Backup of a Flexiport appliance (210 +) is not compatible to any other appliance.

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 Carlos Carrasquillo over 4 years ago in reply to LuCar Toni

I tried importing the setting but nothing imports. I even set up the 4 interfaces and then imported the settings and let it sit for an hour and I don't have the firewall rules or VPN settings.
Cancel
Vote Up 0 Vote Down

Cancel