How to tell what modules are loaded?

Question

Hi, Sorry for the noob question. Can anyone tell me how i can tell what system modules are enabled. I just disabled the SIP module via the command line but the command doesnt seem to give any feedback in the console as to whether it was or wasnt running. It would be nice to be able to check the status of the module and also check if there are any other modules which i may not want running. 
 Many Thanks, Martin

lferrara · Accepted Answer

Type this command in the console: 
 system system_modules show pptp loaded h323 loaded tftp loaded irc loaded sip loaded dns loaded 
 Regards

Eli · Answer

Hello,

here is the command you are looking for: system_modules

system_modules[ h323 { load | unload } | irc { load ( port < string | default > ) | unload } | pptp { load | unload } | sip { load ( port < string | default > ) | unload } | tftp { load ( port < string | default > ) | unload } | show ]

From the SF-OS Command Reference Guide -> https://www.sophos.com/en-us/medialibrary/PDFs/documentation/SophosFirewall/v16/SF-OS-Command-Reference-Guide.pdf

Sincerely

Eli.