Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 6680 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG in transparent bridge

WilliamHopper

I have pfSense as a router and am trying to make XG my transparent UTM on a separate host with three NICs and two configured in bridge however when I connect to the LAN side I cannot access the gateway or the internet. Help?



This thread was automatically locked due to age.
Parents
  • 0
    I spent 4 hours getting this "thing" up and running and ran into the same problem. Back and forth re changing cables and then finally redoing the wizard once the port 1 and port 2 was figured out. I have pinned down cables that need to set the same way as UTM9. Default here was opposite to what I had on UTM9. Had a hell of a time getting this thing up in transparent bridge. It is but not enough control. Where do I turn off the proxy when some program updates need to be done and the proxy smokes the update?
Reply
  • 0
    I spent 4 hours getting this "thing" up and running and ran into the same problem. Back and forth re changing cables and then finally redoing the wizard once the port 1 and port 2 was figured out. I have pinned down cables that need to set the same way as UTM9. Default here was opposite to what I had on UTM9. Had a hell of a time getting this thing up in transparent bridge. It is but not enough control. Where do I turn off the proxy when some program updates need to be done and the proxy smokes the update?
Children
No Data
Unfiltered HTML