Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 10460 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB ethernet support in Sophos XG

AsimMian

I have a USB to Ethernet  connector which works fine with Sophos UTM but the same isn't working  with XG firewall.

I don't see it listed in Interfaces section and neither option to add new physical interface. While doing some research in CLI i found its getting detected by OS but not shown in Interfaces section. Below are the logs from "dmesg" command from CLI.

[ 616.617431] usb 1-1.3: USB disconnect, device number 3
[ 619.645937] usb 2-1.4: new high-speed USB device number 4 using ehci-pci

I am using software based firewall running on lintel based motherboard.



This thread was automatically locked due to age.
Unfiltered HTML