Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 38 subscribers
  • Views 10646 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Load Avarage - strange calculation

Slawski

I'm seeing LoadAvg of 1.7 almost all the time on a newly setup XG Firewall. CPU is idle most of the time.

Clicking on Dashboard and looking at "System" show the same graph for system load like it would be just a static picture - no changes over time.

BTW: I have configured WWAN modem - and although it works connection status on dashboard is always "down".

Early bugs?

Kind regards,

Slawomir K.



This thread was automatically locked due to age.
Parents
  • 0
    What have you connected your WWAN to so that it would be up?

    When you click on the CPU graph on the summary page, what do you see? Mine averages 0.67% max 13.49%.
    Home user with 8gb and 4 cpus.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk
    Mine idles at 0.88% avg for the last 24h.

    I have connected a Huawei E3131-s2 3G dongle which was working fine with Sophos UTM 9.x. It logs to the 3G network and gets IP. I can disconnect ethernet cable from Port2 (WAN up-link) and XG Firewall switches to WWAN. I can browse the Internet and it works exactly the same as using ethernet uplink, but WWAN status is always "down".

    Regards,
    Slawek

Reply
  • 0 in reply to rfcat_vk
    Mine idles at 0.88% avg for the last 24h.

    I have connected a Huawei E3131-s2 3G dongle which was working fine with Sophos UTM 9.x. It logs to the 3G network and gets IP. I can disconnect ethernet cable from Port2 (WAN up-link) and XG Firewall switches to WWAN. I can browse the Internet and it works exactly the same as using ethernet uplink, but WWAN status is always "down".

    Regards,
    Slawek

Children
No Data
Unfiltered HTML