Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 36963 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPsec Site to Site

DMR188

Has anyone setup an IPSEC Site to Site VPN yet?  I have everything set and am connecting (Even though it will only connect 1 network and not all, but thats a different issue) to the remote firewall.  Everything shows green in Settings/VPN/IPsec.  However, I noticed the automatic firewall rule has been removed from the VPN setup.  So I'm not able to communicate across the tunnel (mainly printing) and am guessing i need to put in a firewall rule to allow that communication to the remote network and vice-versa.  Can anyone help out with what that rule should be?

Thanks



This thread was automatically locked due to age.
Parents
  • 0
    Hi DMR188,

    If I remember well is needed too to add in device console command for ipsec route and no NAT command. It was discussed in Partner Beta forum but its unfortunately not available now for known reason ...

    The command for ipsec static route is "console> system ipsec_route add net A.B.C.D/P.Q.R.S tunnelname "ipsec tunnelname" " but I do not remember to command for no NAT in ipsec tunnel.

    alda
Reply
  • 0
    Hi DMR188,

    If I remember well is needed too to add in device console command for ipsec route and no NAT command. It was discussed in Partner Beta forum but its unfortunately not available now for known reason ...

    The command for ipsec static route is "console> system ipsec_route add net A.B.C.D/P.Q.R.S tunnelname "ipsec tunnelname" " but I do not remember to command for no NAT in ipsec tunnel.

    alda
Children
No Data
Unfiltered HTML