Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG reduced bandwith after time

Hello everyone,

I am using Sophos XG home version (17.0.6 MR-6) and having a strange behaviour of my WAN.

I am having a 250/25 mbit line at my local ISP which is working fine in general.

 

In general when running a bandwith test I get 230-240 Mbit down + 25 Mbit up - as expected.

But after a couple of hours/days my bandwith is reduced. The results varies from something below 1 Mbit and up to maximum bandwith.

I have contacted the support of my ISP and they told me that everything is fine. In addition to that I have also plugged a device direct to the WAN cable and got the full bandwith.

 

From my point of view my XG is slowing my bandwith down.

 

To resolve the issue I usually need to shutdown the firewall, power off the cable modem and restart both. Then I get my ordinary bandwith back.

 

To be honest: I do not have any glue why this is happening!?

 

In addition to that my XG also stops routing for some seconds. Meaning that I am not able to query any of my VLAN subnets.

So far I found nothing at the log files.

 

 

Does anyone has an idea how to start trouble shooting on that dilemma?

 

Regards,

Mathias



This thread was automatically locked due to age.
Parents
  • Hi Mathias,

    is your XG on a VM? The slowdown behaviour indicates that one of your network is or has failed. The XG becomes very slow when the external network goes down. What do the star in your modem show?

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi Mathias,

    is your XG on a VM? The slowdown behaviour indicates that one of your network is or has failed. The XG becomes very slow when the external network goes down. What do the star in your modem show?

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • Good morning Ian,

     

    no my XG runs with its own hardware (see above).

    The only thing which comes to my mind would be: My WAN port (Port 2) runs manually in 1000 Mbit Full Duplex. When it is set to "Auto" I only get 100 Mbit Halfduplex.

     

    In general the Modem does not show anything which indicates that it is not working as expected - also my ISP mentioned that the Modem does not showing any strange behaviour.

     

    Mathias