Thread Info
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 4535 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has anyone got SQL mirroring to work with Sophos? (using auto failover and putting in two servers in the config)

Timothy Seedorf

So, I'm a DBA....I set up mirroring for the databases with automatic failover, - working fine, no big deal.

 

Problem is, when we change the config for Sophos, the Sophos service will not start.  It is in the format like below (which is exactly what the directions tell you to do)... if we remove the mirrored instance from the config, it works.    What gives?

 

<LocalConfig><ConfigDataVersion>4</ConfigDataVersion><Capabilities>23</Capabilities><ConfigDBSettings><ServerName>XX-SQL2012;YY-SQL2012</ServerName><DatabaseName>SavexCnfg</DatabaseName><AuthType>0</AuthType><UserName></UserName><Password></Password><ConnectionTimeOut>30</ConnectionTimeOut><CommandTimeOut>60</CommandTimeOut></ConfigDBSettings><QuarDBSettings><ServerName>XX-SQL2012;YY-SQL2012</ServerName><DatabaseName>SavexQuar</DatabaseName><AuthType>0</AuthType><UserName></UserName><Password></Password><ConnectionTimeOut>30</ConnectionTimeOut><CommandTimeOut>60</CommandTimeOut></QuarDBSettings><ReportingDBSettings><ServerName>XX-SQL2012;YY-SQL2012</ServerName><DatabaseName>SavexRprt</DatabaseName><AuthType>0</AuthType><UserName></UserName><Password></Password><ConnectionTimeOut>30</ConnectionTimeOut><CommandTimeOut>60</CommandTimeOut></ReportingDBSettings><DirectoryDBSettings><ServerName>XX-SQL2012;YY-SQL2012</ServerName><DatabaseName>SavexDir</DatabaseName><AuthType>0</AuthType><UserName></UserName><Password></Password><ConnectionTimeOut>30

 

Tech support from them was no help.



This thread was automatically locked due to age.
Parents

  • OK, so does anyone use mirroring and just manually fail over by changing all those configs then to the mirrored instance?

     

    This seems like it should be an easy question, requiring simple input from their support - but they couldn't answer on the phone, nor will they respond to us in the past couple of weeks.

Reply

  • OK, so does anyone use mirroring and just manually fail over by changing all those configs then to the mirrored instance?

     

    This seems like it should be an easy question, requiring simple input from their support - but they couldn't answer on the phone, nor will they respond to us in the past couple of weeks.

Children
No Data
Unfiltered HTML