Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 4 subscribers
  • Views 8708 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Puremessage for Exchange 2016

PatrickRoy

We would like to install Puremessage on Exchange 2016 but it seems to be ok only for Exchange 2013. Is a version for Exchange 2016 planed in 2016 ? Thks for answers !



This thread was automatically locked due to age.
Parents
  • 0

    Hi Patrick,

    Puremessage was successfully tested with Exchange 2016 (single server environment). It still needs to be tested on multiple server scenarios including DAG's.

    There's still no official approval or estimate date for support yet, but I believe it will be supported soon (maybe when Puremesage 4.0.3 is released, due December 2016).

    There were no fundamental changes from Exchange 2013 to Exchange 2016, (just like between Exchange 2007 and 2010 and both use Puremessage 3.1.3)...

    If you ever install on a LAB scenario, post some feedback about your experience. :)

Reply
  • 0

    Hi Patrick,

    Puremessage was successfully tested with Exchange 2016 (single server environment). It still needs to be tested on multiple server scenarios including DAG's.

    There's still no official approval or estimate date for support yet, but I believe it will be supported soon (maybe when Puremesage 4.0.3 is released, due December 2016).

    There were no fundamental changes from Exchange 2013 to Exchange 2016, (just like between Exchange 2007 and 2010 and both use Puremessage 3.1.3)...

    If you ever install on a LAB scenario, post some feedback about your experience. :)

Children
No Data
Unfiltered HTML