Hey guys,
I have a small issue that I cannot seem to work out on the Cyberoam.
Its a simple config with a DHCP set up and in the same subnet a second gateway for a dedicated service. Then I have a couple of static routes to send that traffic over that IP. That IP is a Juniper Router supplied via our supplier to access their network.
On the LAN we use a small Emulator program that connects to their IP ranges on Port 23.
We are getting random time outs and disconnects on this software. If I plug direct into the Juniper its find but when back via the CR its getting the drops. Using a PING the network is not dropping so the CR is somehow dropping the connection on port 23
I have a CR15iNG - 10.6.5 MR-1
Is there some kind of "keep alive" for a certain Port / protocol etc?
no web filters, IPS, App filters are configured and the FW rule is pretty much allow everything.
Any suggestions where to look next?
This thread was automatically locked due to age.