This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with DNAT & DVR

I am setting up my DVR to be accessible from WAN, via port forwarding

I have done the following,
1)create a cctv interface
2)give it a dhcp server
3)allow it to access dns
4)define my DVR to a static ip
5)firewall rule is any>any>any
6)masquerade CCTV(network)>WAN
7)NAT DNAT any>cctv port>wan
translate to DVR
automatic firewall rule
initial packets are logged

However when i type in my http://WAN:cctv port, I am not being redirected to my DVR webpage. Anything I missed out?

This thread was automatically locked due to age.

0 BAlfson over 9 years ago

Hi, and welcome to the User BB!

Scott covered all you should need, but I have a stylistic detail to add - I prefer to have a single DNAT that uses a Services Group containing the three services. Be sure to follow #5 in Rulz.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 MazarothIT over 9 years ago

Thanks guys for the great feedback. I've made some changes and can actually see the packets being routed to the device and not dropped. However I am still unable to add the DVR to the ADT app for viewing.

I'm wondering if the ADT DVR server has some WAN access rules coded into it for security...
Cancel
Vote Up 0 Vote Down

Cancel
0 Scott_Klassen over 9 years ago

I'm wondering if the ADT DVR server has some WAN access rules coded into it for security
Or it is using another port as well that we're unaware of. This you would be able to see in the firewall log.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel