Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 39 subscribers
  • Views 3755 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port Forwarding on Sophos Xg86

Abramsu

good day

Pls i have cisco 2901 router and i configure portforwarding to access to my internal server port 49300 and from outside port 9090 and his working

Now i bought Sophos xg86 firewall , i place it between router and switch. I configured Bridge m

 

i did bridge port 1 --lan and port 2 wan , and the bridge ip is 192.168.1.2 , and the internal server ip is 192.168.1.3 

http://ip-pblic:90 , and forward port -local is 4930

router internal ip 192.168.1.1

i have configured dhcp policy on xg and is working 

the cisco router is the dhcp server --192.168.1.1



This thread was automatically locked due to age.
  • 0 in reply to lferrara

    Hello lferrara,

    I also have the same problem, I have cisco router and sophos XG 115W firewall, my firewall is at the middle of my router and switch.

    The firewall is configured in Bridge mode. so i followed your instruction above and created a rule form Wan to Lan as shown in the screenshots below but it's still not forwarding traffic.

    Please advise.

Unfiltered HTML