Home Edition SSL VPN doesn't work

Timon,

Inside the VPN Menu, click on "Show VPN settings" and then configure the SSL VPN tab.

You can have a look at this guide (UI is different but the concept is the same) https://sophserv.sophos.com/repo_kb/122769/file/SFOSv1_Remote_Access_Via_SSL_geng.pdf

Once you have configured it correctly, are you able to ping internal devices?

If not, try to traceroute an internal device (traceroute x.x.x.x).

Also from the permitted Network (IPv4) remove the XG ports and leave only Internal network.

Let us know.

Thanks

Hi Luk

My SSL VPN Settings were correct. But after I removed the two Ports from the "Permitted NEtwork Ressources (IPv4)" everything worked. I got e response from Ping, tracert and I can now configure my XG via VPN.

Thanky you very much :)

Timon

HI Timon , 

While you configure SSL VPN or a Firewall rules based policy , It is recommended you to Create a Host Network and add in the policy and remove the interface Port from any Host . Except Port Forwarding and Site to Site VPN.

Thanks and Regards

Aditya Patel