Home Edition SSL VPN doesn't work

Question

Hi everyone 
 
 I'm setting up my SFOS v16 Home Edition. I can surf from my LAN that works pefect. Next thing is to configure SSL VPN (Remote Access) but it doesn't work properly. I get a IP but I can't ping anything or browse on the Admin/User Portal. What is wrong? 
 
 Sorry for my bad english and thanks for your help 
 
 Pic's of the settings:

lferrara · Accepted Answer

Timon, 
 Inside the VPN Menu, click on "Show VPN settings" and then configure the SSL VPN tab. 
 You can have a look at this guide (UI is different but the concept is the same) https://sophserv.sophos.com/repo_kb/122769/file/SFOSv1_Remote_Access_Via_SSL_geng.pdf 
 Once you have configured it correctly, are you able to ping internal devices? 
 If not, try to traceroute an internal device (traceroute x.x.x.x). 
 Also from the permitted Network (IPv4) remove the XG ports and leave only Internal network. 
 Let us know. 
 Thanks

Aditya Patel · Answer

HI Timon , 
 While you configure SSL VPN or a Firewall rules based policy , It is recommended you to Create a Host Network and add in the policy and remove the interface Port from any Host . Except Port Forwarding and Site to Site VPN. 
 Thanks and Regards 
 Aditya Patel