Thread Info
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Enable SSH on DMZ interface

MichaelGombos

Hello again,

Over the weekend I tried rack our two XG firewalls in High Availability following this guide. The XG quickly flashed a message at the top of the screen that says I can not disable HTTP/HTTPS on that interface. It flashes so quickly I can't take a screen shot of it. That zone is applied to one interface which is connected to an identical XG firewall by a cross over cable.

I called support regarding this a couple months ago the technician seemed pretty confused. We agreed that upgrading to FW 16 was the best bet. Since then, we are on SFOS 16.01.3 MR-2 and still experiencing the issue.

As an alternative, is there a way to enable ssh on this interface via SSH?



This thread was automatically locked due to age.
  • 0

    Hi MichaelGombos, 

    Could you take a short video of the issue you are experiencing, we would like to check on our end. 

    Regards,

    Aditya Patel
    Global Escalation Support Engineer | Sophos Technical Support
    Knowledge Base  |  @SophosSupport | Sign up for SMS Alerts
    If a post solves your question use the 'This helped me' link.

    • 0 in reply to Aditya Patel

      Here's a short video displaying the problem. It seems to think I'm disabling HTTPS as it is highlighted after I click Apply. I've confirmed this happens in Chrome and Firefox. I've also tried clicking off of HTTPS | LAN since it's highlighted when I first open that page, but that didn't help.

      I couldn't get it down to 1024kb, so here it is on Youtube.

      https://youtu.be/414tcuJ1QYw

    • 0

      Hi Michael,

      If you can access the GUI page then enable the SSH for DMZ from Administration | Device Access. There is no way to enable SSH access via shell in the XG firewall.

      Cheers-

      Sachin Gurung
      Team Lead | Sophos Technical Support
      Knowledge Base  |  @SophosSupport  |  Video tutorials
      Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.