This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hotspot Captive Portal not working with VLAN tagging

Hi.

Believe I found a bug :-(

When running with hotspot for vouchers, the captive portal page does not appear if I set up the SSID with VLAN tagging. The clients go directly out to the network with no authentication.

Only workaround I find is to use untagged VLAN and use the built in "Guest Networking" with NAT. Traffic is then routed through the normal LAN, so we loose control over the guest network.

/Andreas

This thread was automatically locked due to age.

Parents

Andreas Gunleikskaas over 7 years ago

Another workaround that we probably will use instead is to use the guest network as the native vlan - this will require some extra work on locating the ports on the switches, but it will probably allow us to use vouchers on guest net and vlan tags for other networks.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Andreas Gunleikskaas over 7 years ago

Another workaround that we probably will use instead is to use the guest network as the native vlan - this will require some extra work on locating the ports on the switches, but it will probably allow us to use vouchers on guest net and vlan tags for other networks.
Cancel
Vote Up 0 Vote Down

Cancel

Children

DirkBolte over 7 years ago in reply to Andreas Gunleikskaas

Hi,

we were able to reproduce this and are working on a fix. The issue is tracked internally with CWIFI-5086 .

Kind regards,

Dirk Bolte
Cancel
Vote Up 0 Vote Down

Cancel