Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 8190 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Bridge Interface and Segregating traffic inside the switch using VLAN's

Zydrunas Peciulaitis

Hello All,

 

I hope u will be able to help me.

I'm using bridge interface which gives me nice one subnet segregation. Everything works fine only if every interface Port1, Port3,... inside bridge have separate switches for each port.

But this is impossible in real environment and I need to bring everything working under one switch. So I try using VLAN's inside the switch only and fail badly. I think because switch try to route package to the bridge interface IP and IP is the same for all the VLAN's. This is just my theory...

If that is the case is there a way how could I achieve this? Switch is dell N1548 series.

Thanks

Zee

 



This thread was automatically locked due to age.
Unfiltered HTML