Sophos Central customers have reported issues preventing successful installation, live terminal and device list access issues in the EU-CENTRAL-1 region For more info refer to KBA-000041338 for the latest updates.

Thread Info
Options
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem when Configuring Bridge with Wireless Interface on XGS 108W localwifi0

Jafet Espinoza

hello community,

I am migrating from XG106W to XGS108W.
One of the first errors when loading the backup was:

In the XG106W configuration, I undid the bridge so that I could load the configurations and then recreate it on the XGS 108W unit.

XG106W bridge details

When trying to configure the bridge on the XGS 108W, the only option available is through Wireless > Access Point > LocalWifi0, which limits the possibility of including three physical interfaces along with wireless, as in the backup configuration.

When trying to create the bridge from Network, the option to add a wireless interface does not appear.

On the other hand, in the XGS 136W model, this functionality is available, allowing to create a bridge with three physical interfaces and one wireless interface, replicating the original configuration.

Is there any way to achieve this configuration on the XGS 108W?

note: the reason for this configuration is because I am using the integrated ap of the xgs108w model and the method of wifi traffic integration is by AP TO LAN. 



This thread was automatically locked due to age.