This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to Install and Login the SSL VPN Client for Windows 10

Here is a great step by step help article for you or your clients for installing and logging into the Sophos SSL VPN Client.

 

Step 1: Open your preferred web browser (Ex: Google Chrome)


 
 
Step 2: At the top of your browser in the address bar, enter the public IP address of your network (Ex: https://169.254.30.211)
 
 
Step 3: You will get a warning that your connection may not be private. Simply bypass this page by clicking "ADVANCED" and then "Proceed to..."
 
Step 4: Login with your given user credentials
 
Step 5: Click "Download Client and Configuration for Windows" and then the download should begin. After the download has finished, double-click it to start the setup.
 
Step 6: Click "Run" on the Security Warning.
 
Step 7: once the installer has started click "Next"
 
Step 8: Read through the license agreement and then click "I Agree"
 
Step 9: Verify the location of where you want the application to be installed, then click "Install"
 
Step 10: In the windows security pop-up click "Install"
 
Step 11: Once the install process has completed click "Next" then "Finish"
 
Step 12: Now that you have the SSL VPN Client installed you'll now want to establish your connection.
 
A)  Access your hidden tray icons
B)  Look for the icon that has 3 squares one of them being red
 
Step 13: Right-Click the VPN icon and select "Connect" 
 
Step 14: Login with the same Username and Password used in "Step 4"
 
Step 15: Verify your connection by seeing if the tray icon went from Red to Green
 
 


Edited TAGs
[edited by: emmosophos at 5:06 PM (GMT -7) on 23 Sep 2022]