Cannot connect to the Branch Internet Router with RED Unified Mode

Question

Hi, 
 After configuring standard/unified mode for a branch RED Device, I am unable to connect to the branch internet router from any branch PC. The traffic is being routed through sophos firewall. I added a route in the branch PC like below but still the same. 
 
 route add branch_router_ip mask 255.255.255.255 branch_red_device_ip 
 route add 192.168.8.1 mask 255.255.255.255 192.168.8.10 
 
 The RED Device IP taken from Firewall DHCP is 192.168.8.10.

Secondly, how can I access the branch internet router LAN Interface from the Head Office Network? 
 
 Thanks.

LuCar Toni · Answer

That is how RED works. 
 The situation here is: RED can only do two modes: Standard / Unified --> Everything to the Firewall, Standard / Split --> Everything except Internet Traffic (Unprotected). 
 https://docs.sophos.com/nsg/sophos-firewall/21.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Network/Interfaces/REDInterfaces/REDOperationModes/index.html

Cannot connect to the Branch Internet Router with RED Unified Mode

Top Replies