Kindly help, I can not access my xg firewall but the ip is responding to ping
This thread was automatically locked due to age.
Kindly help, I can not access my xg firewall but the ip is responding to ping
Hello Idris Sanni1 ,
Thank you for reaching out to the community, please refer the KBA here.
Thanks & Regards,
_______________________________________________________________
Vivek Jagad | Team Lead, Global Support & Services
Log a Support Case | Sophos Service Guide
Best Practices – Support Case
Sophos Community | Product Documentation | Sophos Techvids | SMS
If a post solves your question please use the 'Verify Answer' button.
I am connected directly and all port configurations are perfect
Is your PC in the same network as the firewall LAN and does it get an IP address from the XG or are you manually assigning?
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
I first noticed it connecting via the wireless access point before connecting directly to the device itself.
While testing, I tested with a server connected directly to the switch, machine connected via access point and another connected directly to the xg all gave same response.
Hi,
beginning to look like a fresh install using the default settings?
Have you at any time changed the access rights to the XG?
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Hi,
because you have not configured the XG yet, you might find that you are trying to connect to the a non configured port, try swapping to other ports.
You have advised you can access the console, please review the network configuration shown.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Hello,
What was the output of the following:
if the GUI is still inaccessible, verify the configured destination port used for HTTPS GUI access using the following command: psql -U nobody -d corporate -c "select destinationport from tbllocalservicedetails WHERE localserviceid =2"
p.s You run this one from the Advanced Shell not the console
I will try the command then give an update.
How do I get to the advance shell since it is only accessible via console?
Youu advised you had console access in an earlier post in this thread.
Nowhere have you mentioned you have restarted your XG from a total power off.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Please post a copy of the login to the console screen you are seeing, you appear to be missing or using the wrong menu item?
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
Hi,
thank you for the screenshot. After following the above thread I think you will need to re-image the XG. I hope you have a backup?
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.
I suspect a faulty disk. When in the console if you type "?" you should see a list of commands that you can use to explore your XG. The console display appears to be missing details.
Ian
XG115W - v20 GA - Home
XG on VM 8 - v20 GA
If a post solves your question please use the 'Verify Answer' button.